How to Level a Garage Door in Emergency?
In case you own a light weight garage door in Andover (07821) that does not support an adjuster for leveling, you can easily perform garage door repair & level your door by following the simple steps mentioned below.
-
Calculate the Distance
-
Replace Cables
-
Turn Off Electricity
-
Make the First Adjustment
-
Moving to The Other Side
-
Stabilizing the Shaft
-
Check the Level
First establish the exact dimensions of the gap beneath your door. This can be accomplished by measuring the total distance travelled by the shaft.
Ensure that your garage door cables are not frayed by any means. In case they are, immediately get them replaced with new ones before leveling with the assistance of garage door repair professionals in Andover (07821).
Make sure you turn the power button off and unplug your garage door from the source, such that the door does not turn on.
Begin with the side that is opposite to the gap. To raise the lower sides of the door, turn the setscrews in clockwise direction. This will make the screws tight and lift the door eventually.
Now mark the present position of the shaft and the drum on the alternate side. The shaft is marked at about ¼ inch over the mark of the drum.
Exploit the use of a vise grip in order to stabilize the shaft. Hold one end of the vise grip over the door, to ensure the drum does not move in excess. Loosen the setscrew slowly and allow the two marks to line up. Now tighten and loosen the screws to achieve this point.
Check your door at this point to ensure that it is level. Carefully tighten all the screws at this point. Take the vise grip off and turn the power on.
How to Find Professional Garage Door Repair Service in Andover? (Create H2 Tag)
Dial (732) 322-8877 for garage door replacements, installations or any kind of garage door repairs in Andover!
Contact us for further details
Garage door repair, maintenance and installation service.